Infection prevention
Prevent transmission through consistent standard precautions and a validated decontamination process. The patient’s stated infection status is not a substitute for these controls.
Quick revision summary
Standard precautions and the chain of infection
Transmission depends on a source, route and susceptible host. Hand hygiene, task-appropriate PPE, environmental cleaning, sharps safety and instrument processing interrupt different links.
Keep dirty and clean processes distinct
The movement of used instruments, staff and equipment should support separation of contaminated and clean work. Follow the applicable national decontamination guidance and validated local procedures.
Make prevention practical at the chairside
Plan where sharps are placed and disposed of before starting. Avoid unnecessary passing or manipulation, use appropriate safety devices and keep disposal containers accessible without overfilling them.
Common mistake
A log of checks is only useful when failed checks lead to action.
Infection prevention and exposure management
Prevent transmission through consistent standard precautions and a validated decontamination process. The patient’s stated infection status is not a substitute for these controls.
Standard precautions and the chain of infection
Transmission depends on a source, route and susceptible host. Hand hygiene, task-appropriate PPE, environmental cleaning, sharps safety and instrument processing interrupt different links. Apply standard precautions to all patients, with additional precautions when indicated by the infection and setting.
Use safe sharps handling and disposal and avoid unnecessary manual manipulation. Team organisation matters: pass and position instruments so that the working field is controlled. PPE reduces exposure risk but does not eliminate the consequences of a sharps injury or replace vaccination and training.
Cleaning is not sterilisation
| Process | Purpose | Limit |
|---|---|---|
| Cleaning | Removes visible soil and material that can interfere with later processing | Does not establish sterility. |
| Disinfection | Reduces or inactivates specified microorganisms | Not equivalent to a validated sterilisation process for critical reusable instruments. |
| Sterilisation | Validated process intended to eliminate viable microorganisms, including spores | Depends on correct cycle, loading, maintenance and verification. |
| Packaging / storage | Maintains the required condition until use | Damaged packaging, moisture or inappropriate storage can compromise the process. |
| Traceability / checks | Provides evidence that the system is functioning | A log without a valid process is insufficient. |
A sharps injury is time-sensitive
Provide immediate first aid according to the exposure type and local procedure, report promptly and obtain occupational-health or emergency assessment. Establish the device, route, depth, source risk and relevant vaccination / immunity. Follow the appropriate blood-borne-virus exposure pathway; post-exposure prophylaxis decisions can be time-critical.
Record the event, assessment, advice and follow-up without inappropriate disclosure of source-patient information. Review the system that led to the injury, such as handling, disposal or workload, and implement practical prevention. Exposure management and incident learning are linked responsibilities.
Keep dirty and clean processes distinct
The movement of used instruments, staff and equipment should support separation of contaminated and clean work. Follow the applicable national decontamination guidance and validated local procedures. The sequence includes cleaning, inspection, the appropriate sterilisation process and storage that protects the processed instrument. A successful machine cycle cannot prove that an inadequately cleaned or incorrectly loaded instrument is ready for use.
Use documented maintenance and performance checks, and act when a process fails. Damaged packaging, wet loads, an indicator concern or an equipment fault requires assessment before affected instruments are released. Traceability helps identify which items or patients may be involved, but it is useful only if the records reflect the actual process.
Make prevention practical at the chairside
Plan where sharps are placed and disposed of before starting. Avoid unnecessary passing or manipulation, use appropriate safety devices and keep disposal containers accessible without overfilling them. Do not rely on memory during a crowded procedure when layout and team roles can remove the risk. Apply hand hygiene and PPE to the task, including removal that avoids self-contamination.
After an exposure, immediate first aid and prompt occupational-health or emergency assessment take priority. Record what happened, including the route and relevant device details, and follow the advised testing and review pathway. Investigate the conditions that contributed: unsuitable equipment, interruption, workload or unclear responsibilities may need changes even when an individual made the final error.
A distinction to remember
A log of checks is only useful when failed checks lead to action.
Why should visible debris be removed before instrument sterilisation?
Reveal the reasoning
Soil can interfere with effective processing. Cleaning, inspection, validated sterilisation and appropriate storage are sequential parts of a functioning system.
Guidance to read alongside this chapter
Test your recall
What should happen after a sharps injury?
Show answer
Immediate first aid, reporting and risk assessment under local protocol.
